4000 Router Series IP Multicast Configuration Guide

ManualsBrandsHP ManualsNetwork HardwareHP MSR3024 TAA-compliant AC Router

191

192

193

194

195

196

197

198

199

200

192

[CEa3] multicast routing

[CEa3-mrib] quit

# Assign an IP address to Ethernet 1/1, and enable IGMP and PIM-SM on it.

[CEa3] interface ethernet 1/1

[CEa3-Ethernet1/1] ip address 10.110.10.1 24

[CEa3-Ethernet1/1] igmp enable

[CEa3-Ethernet1/1] pim sm

[CEa3-Ethernet1/1] quit

# Assign an IP address to Ethernet 1/2 and enable PIM-SM on it.

[CEa3] interface ethernet 1/2

[CEa3-Ethernet1/2] ip address 10.110.5.2 24

[CEa3-Ethernet1/2] pim sm

[CEa3-Ethernet1/2] quit

# Assign an IP address to Ethernet 1/3 and enable PIM-SM on it.

[CEa3] interface ethernet 1/3

[CEa3-Ethernet1/3] ip address 10.110.12.2 24

[CEa3-Ethernet1/3] pim sm

[CEa3-Ethernet1/3] quit

# Configure RIP.

[CEa3] rip 2

[CEa3-rip-2] network 10.0.0.0

9. Configure CE b2:

# Enable IP multicast routing.

<CEb2> system-view

[CEb2] multicast routing

[CEb2-mrib] quit

# Assign an IP address to Ethernet 1/1, and enable IGMP and PIM-SM on it.

[CEb2] interface ethernet 1/1

[CEb2-Ethernet1/1] ip address 10.110.11.1 24

[CEb2-Ethernet1/1] igmp enable

[CEb2-Ethernet1/1] pim sm

[CEb2-Ethernet1/1] quit

# Assign an IP address to Ethernet 1/2 and enable PIM-SM on it.

[CEb2] interface ethernet 1/2

[CEb2-Ethernet1/2] ip address 10.110.6.2 24

[CEb2-Ethernet1/2] pim sm

[CEb2-Ethernet1/2] quit

# Configure RIP.

[CEb2] rip 3

[CEb2-rip-3] network 10.0.0.0

Verifying the configuration

Use the display multicast-domain default-group command to display the default-group information.

# Display information about the default-groups in VPN instances on PE 1.

[PE1] display multicast-domain default-group

Group address Source address Interface VPN instance