4000 Router Series IP Multicast Configuration Guide

ManualsBrandsHP ManualsNetwork HardwareHP MSR3024 TAA-compliant AC Router

201

202

203

204

205

206

207

208

209

210

200

# Assign an IP address to the public network interface Ethernet 1/1, and enable PIM-SM, MPLS

capability, and LDP capability on it.

[PE3] interface ethernet 1/1

[PE3-Ethernet1/1] ip address 10.10.2.1 24

[PE3-Ethernet1/1] pim sm

[PE3-Ethernet1/1] mpls enable

[PE3-Ethernet1/1] mpls ldp enable

[PE3-Ethernet1/1] quit

# Assign an IP address to the public network interface Ethernet 1/2, and enable PIM-SM and MPLS

on it.

[PE3] interface ethernet 1/2

[PE3-Ethernet1/2] ip address 192.168.1.2 24

[PE3-Ethernet1/2] pim sm

[PE3-Ethernet1/2] mpls enable

[PE3-Ethernet1/2] quit

# Assign an IP address to Loopback 1 and enable PIM-SM on this interface.

[PE3] interface loopback 1

[PE3-LoopBack1] ip address 1.1.1.3 32

[PE3-LoopBack1] pim sm

[PE3-LoopBack1] quit

# Assign an IP address to Loopback 2 and enable PIM-SM on this interface.

[PE3] interface loopback 2

[PE3-LoopBack2] ip address 22.22.22.22 32

[PE3-LoopBack2] pim sm

[PE3-LoopBack2] quit

# Configure Loopback 2 as a C-BSR and a C-RP for the public network instance.

[PE3] pim

[PE3-pim] c-bsr 22.22.22.22

[PE3-pim] c-rp 22.22.22.22

[PE3-pim] quit

# Configure BGP.

[PE3] bgp 200

[PE2-bgp] address-family ipv4

[PE3-bgp-ipv4] import-route ospf 1

[PE3-bgp-ipv4] quit

[PE3-bgp] group pe3-pe4 internal

[PE3-bgp] peer pe3-pe4 route-policy map2 export

[PE3-bgp] peer pe3-pe4 label-route-capability

[PE3-bgp] peer pe3-pe4 connect-interface loopback 1

[PE3-bgp] peer 1.1.1.4 group pe3-pe4

[PE3-bgp] group pe3-pe2 external

[PE3-bgp] peer pe3-pe2 as-number 100

[PE3-bgp] peer pe3-pe2 route-policy map1 export

[PE3-bgp] peer pe3-pe2 label-route-capability

[PE3-bgp] peer pe3-pe2 connect-interface loopback 1

[PE3-bgp] peer 1.1.1.2 group pe3-pe2

[PE3–bgp] quit