4000 Router Series IP Multicast Configuration Guide

ManualsBrandsHP ManualsNetwork HardwareHP MSR3024 TAA-compliant AC Router

201

202

203

204

205

206

207

208

209

210

202

[PE4] interface ethernet 1/1

[PE4-Ethernet1/1] ip address 10.10.2.2 24

[PE4-Ethernet1/1] pim sm

[PE4-Ethernet1/1] mpls enable

[PE4-Ethernet1/1] mpls ldp enable

[PE4-Ethernet1/1] quit

# Bind Ethernet 1/2 with VPN instance a, assign an IP address to Ethernet 1/2, and enable

PIM-SM on the interface.

[PE4] interface ethernet 1/2

[PE4-Ethernet1/2] ip binding vpn-instance a

[PE4-Ethernet1/2] ip address 10.11.3.1 24

[PE4-Ethernet1/2] pim sm

[PE4-Ethernet1/2] quit

# Bind Ethernet 1/3 with VPN instance b, assign an IP address to Ethernet 1/3, and enable

PIM-SM on the interface.

[PE4] interface ethernet 1/3

[PE4-Ethernet1/3] ip binding vpn-instance b

[PE4-Ethernet1/3] ip address 10.11.4.1 24

[PE4-Ethernet1/3] pim sm

[PE4-Ethernet1/3] quit

# Assign an IP address to Loopback 1 and enable PIM-SM on this interface.

[PE4] interface loopback 1

[PE4-LoopBack1] ip address 1.1.1.4 32

[PE4-LoopBack1] pim sm

[PE4-LoopBack1] quit

# Configure BGP.

[PE4] bgp 200

[PE4-bgp] group pe4-pe3 internal

[PE4-bgp] peer pe4-pe3 label-route-capability

[PE4-bgp] peer pe4-pe3 connect-interface loopback 1

[PE4-bgp] peer 1.1.1.3 group pe4-pe3

[PE4-bgp] group pe4-pe1 external

[PE4-bgp] peer pe4-pe1 as-number 100

[PE4-bgp] peer pe4-pe1 ebgp-max-hop 255

[PE4-bgp] peer 1.1.1.1 group pe4-pe1

[PE4-bgp] peer pe4-pe1 connect-interface loopback 1

[PE4–bgp] ip vpn-instance a

[PE4-bgp-a] address-family ipv4

[PE4-bgp-ipv4-a] import-route ospf 2

[PE4-bgp-ipv4-a] import-route direct

[PE4-bgp-ipv4-a] quit

[PE4-bgp-a] quit

[PE4–bgp] ip vpn-instance b

[PE4-bgp-b] address-family ipv4

[PE4-bgp-ipv4-b] import-route ospf 3

[PE4-bgp-ipv4-b] import-route direct

[PE4-bgp-ipv4-b] quit

[PE4-bgp-b] quit