HP MSR2000/3000/4000 Router Series IP Multicast Configuration Guide

85
detect DR failures and start a new DR election process. For more information about BFD, see High
Availability Configuration Guide.
Before you configure this feature on an interface, be sure to enable PIM-DM or PIM-SM on the interface.
To enable PIM to work with BFD:
Ste
p
Command Remarks
1. Enter system view.
system-view N/A
2. Enter interface view.
interface interface-type interface-number N/A
3. Enable PIM to work
with BFD.
pim bfd enable
By default, PIM is disabled to
work with BFD.
Displaying and maintaining PIM
Execute display commands in any view.
Task Command
Display BSR information in the
PIM-SM domain.
display pim [ vpn-instance vpn-instance-name ] bsr-info
Display information about the
routes used by PIM.
display pim [ vpn-instance vpn-instance-name ] claimed-route
[ source-address ]
Display C-RP information in the
PIM-SM domain.
display pim [ vpn-instance vpn-instance-name ] c-rp [ local ]
Display PIM information on an
interface.
display pim [ vpn-instance vpn-instance-name ] interface [ interface-type
interface-number ] [ verbose ]
Display PIM neighbor information.
display pim [ vpn-instance vpn-instance-name ] neighbor
[ neighbor-address | interface interface-type interface-number |
verbose ] *
Display PIM routing table
information.
display pim [ vpn-instance vpn-instance-name ] routing-table
[ group-address [ mask { mask-length | mask } ] | source-address [ mask
{ mask-length | mask } ] | flags flag-value | fsm | incoming-interface
interface-type interface-number | mode mode-type | outgoing-interface
{ exclude | include | match } interface-type interface-number ] *
Display RP information in the
PIM-SM domain.
display pim [ vpn-instance vpn-instance-name ] rp-info [ group-address ]
Display statistics for PIM packets. display pim statistics