HP MSR2000/3000/4000 Router Series Layer 2 - LAN Switching Command Reference
Table Of Contents
- Title Page
- Contents
- MAC address table commands
- Port isolation commands
- Spanning tree commands
- active region-configuration
- check region-configuration
- display stp
- display stp abnormal-port
- display stp bpdu-statistics
- display stp down-port
- display stp history
- display stp region-configuration
- display stp root
- display stp tc
- instance
- region-name
- reset stp
- revision-level
- stp bpdu-protection
- stp bridge-diameter
- stp compliance
- stp config-digest-snooping
- stp cost
- stp edged-port
- stp enable
- stp global config-digest-snooping
- stp global enable
- stp global mcheck
- stp loop-protection
- stp max-hops
- stp mcheck
- stp mode
- stp no-agreement-check
- stp pathcost-standard
- stp point-to-point
- stp port priority
- stp port-log
- stp priority
- stp region-configuration
- stp role-restriction
- stp root primary
- stp root secondary
- stp root-protection
- stp tc-protection
- stp tc-protection threshold
- stp tc-restriction
- stp timer forward-delay
- stp timer hello
- stp timer max-age
- stp timer-factor
- stp transmit-limit
- vlan-mapping modulo
- Loop detection commands
- VLAN commands
- LLDP commands
- display lldp local-information
- display lldp neighbor-information
- display lldp statistics
- display lldp status
- display lldp tlv-config
- lldp admin-status
- lldp check-change-interval
- lldp enable
- lldp encapsulation snap
- lldp fast-count
- lldp global enable
- lldp hold-multiplier
- lldp management-address-format string
- lldp max-credit
- lldp mode
- lldp notification med-topology-change enable
- lldp notification remote-change enable
- lldp timer fast-interval
- lldp timer notification-interval
- lldp timer reinit-delay
- lldp timer tx-interval
- lldp tlv-enable
- Support and other resources
- Index
107
lldp tlv-enable { basic-tlv { all | port-description | system-capability | system-description |
system-name | management-address-tlv [ ip-address ] } | dot1-tlv { all | port-vlan-id |
link-aggregation | protocol-vlan-id [ vlan-id ] | vlan-name [ vlan-id ] | management-vid
[ mvlan-id ] } | dot3-tlv { all | mac-physic | max-frame-size | power } | med-tlv { all | capability
| inventory | network-policy | power-over-ethernet | location-id { civic-address device-type
country-code { ca-type ca-value }&<1-10> | elin-address tel-number } } }
undo lldp tlv-enable { basic-tlv { all | port-description | system-capability | system-description |
system-name | management-address-tlv } | dot1-tlv { all | port-vlan-id | link-aggregation |
protocol-vlan-id | vlan-name | management-vid } | dot3-tlv { all | mac-phy
sic | max-frame-size
| power } | med-tlv { all | capability | inventory | network-policy | power-over-ethernet |
location-id } }
• For nearest non-TPMR bridge agents:
lldp agent nearest-nontpmr tlv-enable { basic-tlv { all | port-description | system-capability |
system-description | system-name | management-address-tlv [ ip-address ] } | dot1-tlv { all |
port-vlan-id | link-aggregation } }
undo lldp agent nearest-nontpmr tlv-enable { basic-tlv { all | port-description | system-capability
| system-description | system-name | management-address-tlv } | dot1-tlv { all | port-vlan-id |
link-aggregation } }
• For nearest customer bridge agents:
lldp agent nearest-customer tlv-enable { basic-tlv { all | port-description | system-capability |
system-description | system-name | management-address-tlv [ ip-address ] } | do
t1-tlv { all |
port-vlan-id | link-aggregation } }
undo lldp agent nearest-customer tlv-enable { basic-tlv { all | port-description | system-capability
| system-description | system-name | management-address-tlv } | dot1-tlv { all | port-vlan-id |
link-aggregation } }
In Layer 3 Ethernet interface view:
• lldp tlv-enable { basic-tlv { all | port-description | system-capability | system-description |
system-name | management-address-tlv [ ip-address ] } | dot1-tlv { all | link-aggregation } |
dot3-tlv { all | mac-physic | max-frame-size | power } | med-tlv { all | capability | inventory |
power-over-ethernet | location-id { civic-address device-type country-code { ca-type
ca-value }&<1-10> | elin-address tel-number } } }
• lldp agent { nearest-nontpmr | near
est-customer } tlv-enable { basic-tlv { all | port-description |
system-capability | system-description | system-name | management-address-tlv [ ip-address ] }
| dot1-tlv { all | link-aggregation } }
• undo lldp tlv-enable { basic-tlv { all | port-description | system-capability | system-description |
system-name | management-address-tlv } | dot1-tlv { all | link-aggregation } | dot3-tlv { all |
mac-physic | max-frame-size | power } | med-tlv { all | capability | inventory |
power-over-ethernet | location-id } }
• undo lldp agent { nearest-nontpmr | nearest-customer } tlv-enable { basic-tlv { all |
port-description | system-capability | system-description | system-name |
management-address-tlv } | dot1-tlv { all | link
-aggregation } }
Default
On Layer 2 Ethernet interfaces:
• Nearest bridge agents can advertise all types of LLDP TLVs except the location identification TLV,
port and protocol VLAN ID TLVs, VLAN name TLVs, and management VLAN ID TLVs.