HP MSR2000/3000/4000 Router Series Layer 2 - LAN Switching Command Reference
Table Of Contents
- Title Page
- Contents
- MAC address table commands
- Port isolation commands
- Spanning tree commands
- active region-configuration
- check region-configuration
- display stp
- display stp abnormal-port
- display stp bpdu-statistics
- display stp down-port
- display stp history
- display stp region-configuration
- display stp root
- display stp tc
- instance
- region-name
- reset stp
- revision-level
- stp bpdu-protection
- stp bridge-diameter
- stp compliance
- stp config-digest-snooping
- stp cost
- stp edged-port
- stp enable
- stp global config-digest-snooping
- stp global enable
- stp global mcheck
- stp loop-protection
- stp max-hops
- stp mcheck
- stp mode
- stp no-agreement-check
- stp pathcost-standard
- stp point-to-point
- stp port priority
- stp port-log
- stp priority
- stp region-configuration
- stp role-restriction
- stp root primary
- stp root secondary
- stp root-protection
- stp tc-protection
- stp tc-protection threshold
- stp tc-restriction
- stp timer forward-delay
- stp timer hello
- stp timer max-age
- stp timer-factor
- stp transmit-limit
- vlan-mapping modulo
- Loop detection commands
- VLAN commands
- LLDP commands
- display lldp local-information
- display lldp neighbor-information
- display lldp statistics
- display lldp status
- display lldp tlv-config
- lldp admin-status
- lldp check-change-interval
- lldp enable
- lldp encapsulation snap
- lldp fast-count
- lldp global enable
- lldp hold-multiplier
- lldp management-address-format string
- lldp max-credit
- lldp mode
- lldp notification med-topology-change enable
- lldp notification remote-change enable
- lldp timer fast-interval
- lldp timer notification-interval
- lldp timer reinit-delay
- lldp timer tx-interval
- lldp tlv-enable
- Support and other resources
- Index

20
TCN received 0
TCA sent 0
TCA received 2 10:33:12 01/13/2011
Config sent 0
Config received 0
RST sent 0
RST received 0
MST sent 4 10:33:11 01/13/2011
MST received 151 10:37:43 01/13/2011
Instance 0:
Type Count Last Updated
--------------------------- ---------- -----------------
Timeout BPDUs 0
MAX-hoped BPDUs 0
TC detected 1 10:32:40 01/13/2011
TC sent 3 10:33:11 01/13/2011
TC received 0
Table 8 Command output
Field Descri
p
tion
Port Port name.
Instance-Independent Statistics not related to any particular MSTI.
Type Statistical item.
Looped-back BPDUs BPDUs sent and then received by the same port.
MAX-aged BPDUs BPDUs whose max age was exceeded.
TCN sent TCN BPDUs sent.
TCN received TCN BPDUs received.
TCA sent TCA BPDUs sent.
TCA received TCA BPDUs received.
Config sent Configuration BPDUs sent.
Config received Configuration BPDUs sent.
RST sent Configuration BPDUs received.
RST received RSTP BPDUs sent.
MST sent RSTP BPDUs received.
MST received MSTP BPDUs sent.
Instance Statistical information for a particular MSTI.
Timeout BPDUs Expired BPDUs.
MAX-hoped BPDUs BPDUs whose maximum hops were exceeded.
TC detected TC BPDUs detected.
TC sent TC BPDUs sent.
TC received TC BPDUs received.