HP MSR2000/3000/4000 Router Series Layer 2 - LAN Switching Command Reference
Table Of Contents
- Title Page
- Contents
- MAC address table commands
- Port isolation commands
- Spanning tree commands
- active region-configuration
- check region-configuration
- display stp
- display stp abnormal-port
- display stp bpdu-statistics
- display stp down-port
- display stp history
- display stp region-configuration
- display stp root
- display stp tc
- instance
- region-name
- reset stp
- revision-level
- stp bpdu-protection
- stp bridge-diameter
- stp compliance
- stp config-digest-snooping
- stp cost
- stp edged-port
- stp enable
- stp global config-digest-snooping
- stp global enable
- stp global mcheck
- stp loop-protection
- stp max-hops
- stp mcheck
- stp mode
- stp no-agreement-check
- stp pathcost-standard
- stp point-to-point
- stp port priority
- stp port-log
- stp priority
- stp region-configuration
- stp role-restriction
- stp root primary
- stp root secondary
- stp root-protection
- stp tc-protection
- stp tc-protection threshold
- stp tc-restriction
- stp timer forward-delay
- stp timer hello
- stp timer max-age
- stp timer-factor
- stp transmit-limit
- vlan-mapping modulo
- Loop detection commands
- VLAN commands
- LLDP commands
- display lldp local-information
- display lldp neighbor-information
- display lldp statistics
- display lldp status
- display lldp tlv-config
- lldp admin-status
- lldp check-change-interval
- lldp enable
- lldp encapsulation snap
- lldp fast-count
- lldp global enable
- lldp hold-multiplier
- lldp management-address-format string
- lldp max-credit
- lldp mode
- lldp notification med-topology-change enable
- lldp notification remote-change enable
- lldp timer fast-interval
- lldp timer notification-interval
- lldp timer reinit-delay
- lldp timer tx-interval
- lldp tlv-enable
- Support and other resources
- Index
3
display mac-address mac-learning
Use display mac-address mac-learning to verify whether MAC address learning has been enabled
globally or on an interface.
Syntax
display mac-address mac-learning [ interface interface-type interface-number ]
Views
Any view
Predefined user roles
network-admin
network-operator
Parameters
interface interface-type interface-number: Specifies an interface by its type and number. If you execute
this command without specifying an interface, this command displays the global MAC address learning
status and the MAC address learning status of each interface.
Examples
# Display the global MAC address learning status and the MAC learning status of each interface.
<Sysname> display mac-address mac-learning
Global MAC address learning status: Enabled.
Port Learning Status
Eth2/0 Enabled
Eth2/1 Enabled
Eth2/2 Enabled
Eth2/3 Enabled
Eth2/4 Enabled
Eth2/5 Enabled
Eth2/6 Enabled
Eth2/7 Enabled
Eth2/8 Enabled
Table 2 Command output
Field Description
Global MAC address learning status
Global MAC address learning status:
• Enabled.
• Disabled.
Learning Status
MAC address learning status of an interface:
• Enabled.
• Disabled.
Related commands
mac-address mac-learning enable