HP MSR2000/3000/4000 Router Series Layer 2 - LAN Switching Command Reference
Table Of Contents
- Title Page
- Contents
- MAC address table commands
- Port isolation commands
- Spanning tree commands
- active region-configuration
- check region-configuration
- display stp
- display stp abnormal-port
- display stp bpdu-statistics
- display stp down-port
- display stp history
- display stp region-configuration
- display stp root
- display stp tc
- instance
- region-name
- reset stp
- revision-level
- stp bpdu-protection
- stp bridge-diameter
- stp compliance
- stp config-digest-snooping
- stp cost
- stp edged-port
- stp enable
- stp global config-digest-snooping
- stp global enable
- stp global mcheck
- stp loop-protection
- stp max-hops
- stp mcheck
- stp mode
- stp no-agreement-check
- stp pathcost-standard
- stp point-to-point
- stp port priority
- stp port-log
- stp priority
- stp region-configuration
- stp role-restriction
- stp root primary
- stp root secondary
- stp root-protection
- stp tc-protection
- stp tc-protection threshold
- stp tc-restriction
- stp timer forward-delay
- stp timer hello
- stp timer max-age
- stp timer-factor
- stp transmit-limit
- vlan-mapping modulo
- Loop detection commands
- VLAN commands
- LLDP commands
- display lldp local-information
- display lldp neighbor-information
- display lldp statistics
- display lldp status
- display lldp tlv-config
- lldp admin-status
- lldp check-change-interval
- lldp enable
- lldp encapsulation snap
- lldp fast-count
- lldp global enable
- lldp hold-multiplier
- lldp management-address-format string
- lldp max-credit
- lldp mode
- lldp notification med-topology-change enable
- lldp notification remote-change enable
- lldp timer fast-interval
- lldp timer notification-interval
- lldp timer reinit-delay
- lldp timer tx-interval
- lldp tlv-enable
- Support and other resources
- Index
79
LLDP commands
display lldp local-information
Use display lldp local-information to display local LLDP information, which will be contained in the
advertisable LLDP TLVs and sent to neighboring devices.
Syntax
display lldp local-information [ global | interface interface-type interface-number ]
Views
Any view
Predefined user roles
network-admin
network-operator
Parameters
global: Displays the global local LLDP information.
interface interface-type interface-number: Displays the local LLDP information on the interface specified
by its type and number.
Usage guidelines
If no keyword or argument is specified, this command displays all local LLDP information, including the
global LLDP information and the LLDP information about the LLDP-enabled ports in the up state.
Examples
# Display all local LLDP information.
<Sysname> display lldp local-information
Global LLDP local-information:
Chassis ID : 0cda-41b2-1e38
System name : Sysname
System description : HP Comware Platform Software, Software Version 7.1.042,
ESS 000603
HP MSR3044
Copyright (c) 2004-2013 Hewlett-Packard Development Compa
ny, L.P.
System capabilities supported : Bridge, Router, Customer Bridge, Service Bridge
System capabilities enabled : Bridge, Router, Service Bridge
MED information:
Device class : Connectivity device
HardwareRev : 2.0
FirmwareRev : 1.06
SoftwareRev : 7.1.042 ESS 000603
SerialNum : 210235A0W8B133000041