HP MSR2000/3000/4000 Router Series Layer 2 - LAN Switching Command Reference
Table Of Contents
- Title Page
- Contents
- MAC address table commands
- Port isolation commands
- Spanning tree commands
- active region-configuration
- check region-configuration
- display stp
- display stp abnormal-port
- display stp bpdu-statistics
- display stp down-port
- display stp history
- display stp region-configuration
- display stp root
- display stp tc
- instance
- region-name
- reset stp
- revision-level
- stp bpdu-protection
- stp bridge-diameter
- stp compliance
- stp config-digest-snooping
- stp cost
- stp edged-port
- stp enable
- stp global config-digest-snooping
- stp global enable
- stp global mcheck
- stp loop-protection
- stp max-hops
- stp mcheck
- stp mode
- stp no-agreement-check
- stp pathcost-standard
- stp point-to-point
- stp port priority
- stp port-log
- stp priority
- stp region-configuration
- stp role-restriction
- stp root primary
- stp root secondary
- stp root-protection
- stp tc-protection
- stp tc-protection threshold
- stp tc-restriction
- stp timer forward-delay
- stp timer hello
- stp timer max-age
- stp timer-factor
- stp transmit-limit
- vlan-mapping modulo
- Loop detection commands
- VLAN commands
- LLDP commands
- display lldp local-information
- display lldp neighbor-information
- display lldp statistics
- display lldp status
- display lldp tlv-config
- lldp admin-status
- lldp check-change-interval
- lldp enable
- lldp encapsulation snap
- lldp fast-count
- lldp global enable
- lldp hold-multiplier
- lldp management-address-format string
- lldp max-credit
- lldp mode
- lldp notification med-topology-change enable
- lldp notification remote-change enable
- lldp timer fast-interval
- lldp timer notification-interval
- lldp timer reinit-delay
- lldp timer tx-interval
- lldp tlv-enable
- Support and other resources
- Index
83
Syntax
display lldp neighbor-information [ [ [ interface interface-type interface-number ] [ agent
{ nearest-bridge | nearest-customer | nearest-nontpmr } ] [ verbose ] ] | list [ system-name
system-name ] ]
Views
Any view
Predefined user roles
network-admin
network-operator
Parameters
interface interface-type interface-number: Displays the LLDP information that a port specified by its type
and number receives from the neighboring devices. If this option is not specified, this command displays
the LLDP information that all ports receive from the neighboring devices.
agent: Displays the LLDP information that the LLDP agents of a specific type receive from the neighboring
devices. If no agent type is specified, the command displays the LLDP information that all LLDP agents
receive from the neighboring devices.
nearest-bridge: Specifies nearest bridge agents.
nearest-customer: Specifies nearest customer bridge agents.
nearest-nontpmr: Specifies nearest non-TPMR bridge agents.
verbose: Displays the detailed LLDP information that the local device receives from the neighboring
devices. If this keyword is not specified, this command displays the summary LLDP information that the
local device receives from the neighboring devices.
list: Displays the LLDP information that the local device receives from the neighboring devices in the form
of a list.
system-name system-name: Displays the LLDP information that the local device receives from a
neighboring device specified by its system name. The system-name argument is a character string of 1 to
255 characters. If this option is not specified, this command displays the LLDP information that the local
device receives from all neighboring devices in a list.
Examples
# Display the detailed LLDP information that the nearest bridge agents on all ports receive from the
neighboring devices.
<Sysname> display lldp neighbor-information agent nearest-bridge verbose
LLDP neighbor-information of port 2[GigabitEthernet0/0]:
LLDP agent nearest-bridge:
LLDP neighbor index : 1
Update time : 0 days, 1 hours, 5 minutes, 57 seconds
Chassis type : MAC address
Chassis ID : 0023-89ed-6153
Port ID type : Interface name
Port ID : GigabitEthernet1/0/14
Time to live : 120
Port description : GigabitEthernet1/0/14 Interface
System name : HP