HP MSR2000/3000/4000 Router Series Layer 2 - LAN Switching Command Reference
Table Of Contents
- Title Page
- Contents
- MAC address table commands
- Port isolation commands
- Spanning tree commands
- active region-configuration
- check region-configuration
- display stp
- display stp abnormal-port
- display stp bpdu-statistics
- display stp down-port
- display stp history
- display stp region-configuration
- display stp root
- display stp tc
- instance
- region-name
- reset stp
- revision-level
- stp bpdu-protection
- stp bridge-diameter
- stp compliance
- stp config-digest-snooping
- stp cost
- stp edged-port
- stp enable
- stp global config-digest-snooping
- stp global enable
- stp global mcheck
- stp loop-protection
- stp max-hops
- stp mcheck
- stp mode
- stp no-agreement-check
- stp pathcost-standard
- stp point-to-point
- stp port priority
- stp port-log
- stp priority
- stp region-configuration
- stp role-restriction
- stp root primary
- stp root secondary
- stp root-protection
- stp tc-protection
- stp tc-protection threshold
- stp tc-restriction
- stp timer forward-delay
- stp timer hello
- stp timer max-age
- stp timer-factor
- stp transmit-limit
- vlan-mapping modulo
- Loop detection commands
- VLAN commands
- LLDP commands
- display lldp local-information
- display lldp neighbor-information
- display lldp statistics
- display lldp status
- display lldp tlv-config
- lldp admin-status
- lldp check-change-interval
- lldp enable
- lldp encapsulation snap
- lldp fast-count
- lldp global enable
- lldp hold-multiplier
- lldp management-address-format string
- lldp max-credit
- lldp mode
- lldp notification med-topology-change enable
- lldp notification remote-change enable
- lldp timer fast-interval
- lldp timer notification-interval
- lldp timer reinit-delay
- lldp timer tx-interval
- lldp tlv-enable
- Support and other resources
- Index
87
Field Descri
p
tion
Power pairs
PoE mode:
• Signal—PoE over signal lines.
• Spare—PoE over spare lines.
Port power classification
Port power classification of the PD:
• Class 0.
• Class 1.
• Class 2.
• Class 3.
• Class 4.
Link aggregation supported Indicates whether link aggregation is supported.
Link aggregation enabled Indicates whether link aggregation is enabled.
Capabilities
Capabilities enabled on the neighboring device:
• Bridge—Switching is enabled.
• Router—Routing is enabled.
Local Interface Local port that receives the LLDP information.
Chassis ID : * -- -- Nearest nontpmr
bridge neighbor
#-- -- Nearest customer
bridge neighbor
Chassis ID flag:
• An asterisk (*) indicates the nearest non-two-port MAC relay
(TPMR) bridge neighbor.
• A pound sign (#) indicates the nearest customer bridge neighbor.
display lldp statistics
Use display lldp statistics to display the global LLDP statistics or the LLDP statistics of a port.
Syntax
display lldp statistics [ global | [ interface interface-type interface-number ] [ agent { nearest-bridge |
nearest-customer | nearest-nontpmr } ] ]
Views
Any view
Predefined user roles
network-admin
network-operator
Parameters
global: Displays the global LLDP statistics.
interface interface-type interface-number: Specifies a port by its type and number.
agent: Specifies an LLDP agent type. If no agent type is specified, the command displays the statistics for
all LLDP agents.
nearest-bridge: Specifies nearest bridge agents.
nearest-customer: Specifies nearest customer bridge agents.
nearest-nontpmr: Specifies nearest non-TPMR bridge agents.