HP MSR2000/3000/4000 Router Series Layer 2 - LAN Switching Configuration Guide

22
Tasks at a
g
lance
Configuring the leaf nodes:
• (Required.) Setting the spanning tree mode
• (Optional.) Configuring the device priority
• (Optional.) Configuring the timeout factor
• (Optional.) Configuring the maximum port rate
• (Optional.) Configuring edge ports
• (Optional.) Configuring path costs of ports
• (Optional.) Configuring the port priority
• (Optional.) Configuring the port link type
• (Optional.) Enabling outputting port state transition information
• (Required.) Enabling the spanning tree feature
(Optional.) Performing mCheck
(Optional.) Configuring protection functions
MSTP configuration task list
Tasks at a
g
lance
Configuring the root bridge:
• (Required.) Setting the spanning tree mode
• (Required.) Configuring an MST region
• (Optional.) Configuring the root bridge or a secondary root bridge
• (Optional.) Configuring the device priority
• (Optional.) Configuring the maximum hops of an MST region
• (Optional.) Configuring the network diameter of a switched network
• (Optional.) Configuring spanning tree timers
• (Optional.) Configuring the timeout factor
• (Optional.) Configuring the maximum port rate
• (Optional.) Configuring edge ports
• (Optional.) Configuring the port link type
• (Optional.) Configuring the mode a port uses to recognize and send MSTP packets
• (Optional.) Enabling outputting port state transition information
• (Required.) Enabling the spanning tree feature