HP MSR2000/3000/4000 Router Series Layer 2 - LAN Switching Configuration Guide

71
Ste
p
Command Remarks
1. Enter system view.
system-view N/A
2. Set the LLDP re-initialization
delay.
lldp timer reinit-delay delay The default setting is 2 seconds.
Enabling LLDP polling
With LLDP polling enabled, a device periodically searches for local configuration changes. When the
device detects a configuration change, it sends LLDPDUs to inform neighboring devices of the change.
To enable LLDP polling:
Step Command Remarks
1. Enter system view.
system-view N/A
2. Enter Layer 2 or Layer 3
Ethernet interface view.
interface interface-type interface-number N/A
3. Enable LLDP polling and set
the polling interval.
lldp [ agent { nearest-customer |
nearest-nontpmr } ] check-change-interval
interval
By default, LLDP polling is
disabled.
Configuring the advertisable TLVs
Step Command Remarks
1. Enter system view.
system-view N/A
2. Enter Layer 2 or Layer 3
Ethernet interface view.
interface interface-type interface-number N/A