HP MSR2000/3000/4000 Router Series Layer 2 - WAN Command Reference

112
Field Description
Mobile Country Code (MCC)
The MCC is displayed if the modem has found the network. For example, the
MCC of Mainland China is 460.
Mobile Network Code
(MNC)
The MNC is displayed if the modem is successfully registered with the network.
For example, the code of the GSM network of China Mobile is 00.
Location Area Code (LAC) The LAC is displayed if the modem is successfully registered with the network.
Cell ID The Cell ID is displayed if the modem is successfully registered with the network.
Current Band
Current band selection mode:
• GSM.
• WCDMA.
• ANY.
• AUTO.
Current RSSI
Current RSSI:
• The RSSI ranges from –110 dBm to –51 dBm.
• Unknown—No signal. The cellular interface is unavailable.
PIN Verification
PIN authentication status:
• Disabled.
• Enabled.
PIN Status
• Ready—The USIM/SIM card is normal and has no authentication requests.
• PIN Requirement—The USIM/SIM card has PIN authentication requests.
• PUK Requirement—The USIM/SIM card has PUK authentication requests.
Number of Retries remaining Remaining PIN or PUK authentication request retries.
SIM Status
SIM card status:
• OK—The SIM card is normal.
• Network Reject—The SIM card is denied access to the network. The cellular
interface is unavailable.
• Not Insert—The SIM card is absent. The cellular interface is unavailable.
# Display the call connection information on Cellular 0/0 (TD-SCDMA network).
<Sysname> display cellular 0/0
Cellular0/0:
Hardware Information:
Model: ET128
Modem Firmware Version: 11.101.01.08.00
Hardware Version: CS31TCPU
International Mobile Subscriber Identity (IMSI): 460079011105842
International Mobile Equipment Identity (IMEI): 860039002369111
Factory Serial Number (FSN): GQ4CAB1942911350
Modem Status: Online
Profile Information:
Profile 1: Active
PDP Type: IPv4, Header Compression: Off
Data Compression: Off
Access Point Name (APN): cmnet