HP MSR2000/3000/4000 Router Series Layer 2 - WAN Command Reference

114
Field Description
Access Point Name (APN)
Packet Session Status
Packet session status:
• Active—The 3G Modem is transmitting data through PPP.
• Inactive—The 3G modem is physically down.
Current Service Status
Service status of the 3G modem:
• Service available—The modem is providing services correctly.
• Emergency—The modem is providing limited services. The cellular interface
is unavailable.
• No service—The modem cannot provide services. The cellular interface is
unavailable.
• Low power—The modem is in low power mode. The cellular interface is
unavailable.
Network Selection Mode Network selection mode, which can be manual or automatic.
Network Connection Mode
Network connection mode:
• WCDMA only—Connected to the WCDMA network only.
• WCDMA precedence—Connected to the WCDMA network with preference.
• GSM only—Connected to the GSM network only.
• GSM precedence—Connected to the GSM network with preference.
Current Network Connection
Current network:
• No Service.
• GSM.
• GPRS.
• EDGE.
• TD-SCDMA.
• HSDPA.
• Unknown.
Downstream Bandwidth Downstream bandwidth, in bps.
Radio Information Radio communication information.
Current RSSI
Current RSSI:
• The RSSI ranges from –110 dBm to –51 dBm.
• Unknown—No signal. The cellular interface is unavailable.
PIN Verification
PIN authentication status:
• Disabled.
• Enabled.
PIN Status
• Ready—USIM and SIM cards are normal and have no authentication
requests.
• PIN Requirement—USIM and SIM cards have PIN authentication requests.
• PUK Requirement—USIM and SIM cards have PUK authentication requests.
Number of Retries remaining Remaining PIN or PUK authentication request retries.