HP MSR2000/3000/4000 Router Series Layer 2 - WAN Command Reference

117
Related commands
• mode cdma
• mode td-scdma
• mode wcdma
• pin modify
• pin unlock
• pin verification enable
• pin verify
• plmn select
• profile create
display controller cellular
Use display controller cellular to display information about a cellular interface.
Syntax
display controller [ cellular [ interface-number ] ]
Views
Any view
Predefined user roles
network-admin
network-operator
Parameters
interface-number: Specifies a cellular interface by its number.
Usage guidelines
If the cellular keyword is not specified, the command displays information about all interfaces of the
device.
If the cellular keyword is specified but the interface-number argument is not specified, the command
displays information about the existing cellular interface.
Hot swapping a USB 3G modem clears the cellular interface statistics.
Examples
# Display information about Cellular 0/0.
<Sysname> display controller cellular 0/0
Cellular0/0
Current state: UP
Description: Cellular0/0 Interface
Modem status: Present
DM port status: Disabled
Capability:
1 Control channel, 1 PPP channel
Control channel 0 traffic statistics:
TX: 0 packets, 0 errors