HP MSR2000/3000/4000 Router Series Layer 2 - WAN Command Reference

118
RX: 0 packets, 0 errors
PPP channel 0 traffic statistics:
TX: 0 packets, 0 errors
RX: 0 packets, 0 errors
Table 20 Command output
Field Description
Cellular 0/0
Current state
Status of the interface:
• Administratively DOWN—The interface is administratively
down, which means the interface has been shut down by using
the shutdown command.
• DOWN—The interface is administratively up, but the physical
status of the interface is down (probably because there is no
physical link or the link has failed).
• UP—Both the management status and physical status of the
interface are up.
Description Description of the interface.
Modem status
Status of the USB 3G modem:
• Present—The modem is present.
• Absent—The modem is absent.
DM port status
DM status:
• Enabled—DM is enabled.
• Disabled—DM is disabled.
Capability:
1 Control channel, 1 PPP channel
Type and number of channels the cellular interface supports:
• 1 Control channel—Supports one control channel.
• 1 PPP channel—Supports one asynchronous serial sub-channel.
Control channel 0 traffic statistics:
TX: 0 packets, 0 errors
RX: 0 packets, 0 errors
Control channel statistics:
• TX: 0 packets, 0 errors—Number of packets and number of
error packets sent through the control channel.
• RX: 0 packets, 0 errors—Number of packets and number of
error packets received through the control channel.
PPP channel 0 traffic statistics
TX: 0 packets, 0 errors
RX: 0 packets, 0 errors
PPP channel statistics:
• TX: 0 packets, 0 errors—Number of packets and number of
error packets sent through the PPP channel.
• RX: 0 packets, 0 errors—Number of packets and number of
error packets received through the PPP channel.
Related commands
reset counters controller cellular
dm-port open
NOTE:
Support for DM depends on the modem model.
Use dm-port open to enable DM on a 3G modem.