HP MSR2000/3000/4000 Router Series Layer 2 - WAN Command Reference

124
new-pin: Specifies the new PIN, a string of 4 to 8 digits.
Usage guidelines
A SIM/UIM card will be locked temporarily in the following circumstances:
• Consecutive PIN modification failures.
• Consecutive failures for enabling or disabling PIN authentication.
• Consecutive PIN authentication failures.
To use a 3G modem whose SIM/UIM is locked, first unlock the card by using the PUK.
If you consecutively fail to unlock a card, the card will be locked permanently. To unlock a permanently
locked card, contact the service provider of the card.
Examples
# Use the PUK to unlock a SIM/UIM card.
<Sysname> system-view
[Sysname] controller cellular 0/0
[Sysname-Cellular0/0] pin unlock 87654321 1234
PIN will be unlocked and changed to 1234. Continue? [Y/N]:y
PIN has been unlocked and changed successfully.
Related commands
• pin modify
• pin verification enable
pin verification enable
Use pin verification enable to enable PIN authentication for a 3G modem.
Use undo pin verification enable to disable PIN authentication for a 3G modem.
Syntax
pin verification enable [ pin ]
undo pin verification enable [ pin ]
Default
The default setting depends on the modem model.
Views
Cellular interface view
Predefined user roles
network-admin
Parameters
pin: Specifies the PIN of the SIM/UIM card, a string of 4 to 8 digits.
Usage guidelines
If PIN authentication is enabled, enter the PIN for authentication in the following circumstances:
• Installing a 3G modem.
• Rebooting the device where a USB 3G modem is attached.