4000 Router Series Layer 2 - WAN Command Reference

display interface mp-group

Use display interface mp-group to display information about a specified MP-group interface or all

MP-group interfaces.

Syntax

display interface [ mp-group ] [ brief [ down | description ] ]

display interface [ mp-group [ interface-number ] ] [ brief [ description ] ]

Views

Any view

Predefined user roles

network-admin

network-operator

Parameters

interface-number: Specifies an existing MP-group interface by its number.

brief: Displays brief interface information. If you do not specify this keyword, this command displays

detailed interface information.

down: Displays information about interfaces in physically down state and the causes. If you do not

specify this keyword, this command displays information about interfaces in all states.

description: Displays complete interface description. Without this keyword, this command displays only

the first 27 characters of the interface description if the description has more than 27 characters.

Usage guidelines

If you do not specify the mp-group keyword, this command displays information about all interfaces on

the device.

If you specify the mp-group keyword without the interface-number argument, this command displays

information about all existing MP-group interfaces.

Examples

# Display detailed information about interface MP-group 12.

<Sysname> display interface mp-group 12

MP-group12

Current state: DOWN

Line protocol state: DOWN

Description: MP-group12 Interface

Bandwidth: 0kbps

Maximum Transmit Unit: 1500

Hold timer: 10 seconds

Internet protocol processing: disabled

Link layer protocol: PPP

LCP: initial

Physical: MP

Output queue: (Urgent queue: Size/Length/Discards) 0/50/0

Output queue: (Protocol queue: Size/Length/Discards) 0/500/0

Output queue: (FIFO queuing: Size/Length/Discards) 0/75/0