4000 Router Series Layer 2 - WAN Command Reference

Parameters

interface mp-group interface-number: Specifies an MP-group interface by its number. If no MP-group

interface is specified, this command displays MP information for all MP-group interfaces.

Examples

# Display MP information. (MP is configured through an MP-group interface.)

<Sysname> display ppp mp

Template: MP-group1

max-bind: 20, fragment: enabled, min-fragment: 128

Bundle Multilink, Active members: 2, Master link: MP-group1

Peer's endPoint descriptor: MP-group1

Sequence format: short (rcv)/long (sent)

Bundle Up Time: 2012/11/05 07:29:33:612

0 lost fragments, 0 reordered, 0 unassigned, 0 interleaved

Sequence: 0 (rcv)/0 (sent)

Active member channels: 2 members

Serial2/1:15 Up-Time: 2012/11/05 07:29:33:613

Serial2/1:16 Up-Time: 2012/11/05 07:30:10:945

Inactive member channels: 2 members

Serial2/1:17

Serial2/1:18

Table 4 Command output

Field Description

max-bind Maximum number of links that can be bundled.

fragment

Indicates whether MP fragmentation is enabled: enabled or

disabled.

min-fragment Minimum size of an MP fragment.

Sequence format: short (rcv)/long (sent)

Sequence number header format of MP. The short sequence

number format is used in the incoming direction, and the long

sequence number format is used in the outgoing direction.

reordered Number of reassembled packets.

unassigned Number of packets waiting for being reassembled.

0 interleaved Number of interleaved fragments.

Sequence: 0 (rcv)/0 (sent) Received sequence number/sent sequence number.

Up-Time Uptime of a member channel.

interface mp-group

Use interface mp-group to create an MP-group interface and enter its view. If the MP-group interface

already exists, you enter its view directly.

Use undo interface mp-group to remove an MP-group interface.

Syntax

interface mp-group mp-number