HP MSR2000/3000/4000 Router Series Layer 2 - WAN Command Reference

26
ppp mp lfi size-per-frag
Use ppp mp lfi size-per-frag to set the maximum LFI fragment size (in bytes).
Use undo ppp mp lfi size-per-frag to restore the default.
Syntax
ppp mp lfi size-per-frag size
undo ppp mp lfi size-per-frag
Default
The maximum LFI fragment size depends on the configuration of the ppp mp lfi delay-per-frag command.
Views
MP-group interface view
Predefined user roles
network-admin
Parameters
size: Specifies the maximum LFI fragment size in the range of 40 to 1500 bytes.
Usage guidelines
With LFI enabled, if this command is not configured, the maximum LFI fragment size is derived based on
the interface bandwidth and the maximum LFI fragment transmission delay.
Examples
# Configure the maximum LFI fragment size as 80 bytes on interface MP-group 1.
<Sysname> system-view
[Sysname] interface mp-group 1
[Sysname-MP-group1] ppp mp lfi size-per-frag 80
Related commands
• ppp mp lfi enable
• ppp mp lfi delay-per-frag
ppp mp max-bind
Use ppp mp max-bind to set the maximum number of links allowed in an MP bundle.
Use undo ppp mp max-bind to restore the default.
Syntax
ppp mp max-bind max-bind-num
undo ppp mp max-bind
Default
The maximum number of links allowed in an MP bundle is 16.
Views
MP-group interface view