HP MSR2000/3000/4000 Router Series Layer 2 - WAN Command Reference

29
Syntax
ppp mp short-sequence
undo ppp mp short-sequence
Default
The long sequence number header format is used.
Views
Interface view
Predefined user roles
network-admin
Usage guidelines
This command applies to the incoming direction only. To enable the local end to transmit packets with
short sequence numbers, configure this command on the remote end.
The sequence number format (long or short) of an MP bundle depends on the configuration of the first
channel joining the MP bundle.
To negotiate the use of short sequence numbers on a dialer MP bundle, configure the command on the
dialer interfaces and the ISDN D channels; to do that on a common MP bundle, use the command on all
its channels. The command will cause PPP re-negotiation.
Examples
# Configure the short sequence number header format of MP in the incoming direction of interface Serial
2/0.
<Sysname> system-view
[Sysname] interface serial 2/0
[Sysname-Serial2/0] ppp mp mp-group 1
[Sysname-Serial2/0] ppp mp short-sequence
ppp mp sort-buffer-size
Use ppp mp sort-buffer-size to configure the MP sort buffer size factor.
Use undo ppp mp sort-buffer-size to restore the default.
Syntax
ppp mp sort-buffer-size size
undo ppp mp sort-buffer-size
Default
The MP sort buffer size factor is 1.
Views
MP-group interface view
Predefined user roles
network-admin
Parameters
size: Specifies the MP sort buffer size factor in the range of 1 to 64.