HP MSR2000/3000/4000 Router Series Layer 2 - WAN Command Reference

65
ISDN commands
This feature is supported only on routers installed with BS, BU, E1, or T1 interface modules. For more
information about interface modules, see HP MSR Router Series Interface Module Guide.
display isdn active-channel
Use display isdn active-channel to display calling information for calls successfully established through
Q.931 on an ISDN interface.
Syntax
display isdn active-channel [ interface interface-type interface-number ]
Views
Any view
Predefined user roles
network-admin
network-operator
Parameters
interface interface-type interface-number: Specifies an ISDN interface by its type and number, a BRI or
a PRI. If you do not specify an interface, this command displays calling information for calls successfully
established through Q.931 on all ISDN interfaces.
Usage guidelines
The output helps you troubleshoot ISDN calls.
Examples
# Display calling information for calls successfully established through Q.931 on BRI 2/0.
<Sysname> display isdn active-channel interface bri 2/0
Bri 2/0
Channel Info: B1
Call Property: Digital Call Type: Out
Calling Number: Calling Subaddress:
Called Number: 6688164 Called Subaddress:
Start Time: 05-04-30 14:27:52
Time Used: 00:04:34
Call Property: Analog
Call Type: Out
Calling Number: 1111
Calling Subaddress:
Called Number: 2222
Called Subaddress:
Start Time: 13-03-14 15:22:26
Time Used: 00:01:10