4000 Router Series Layer 2 - WAN Command Reference

# Display calling information for calls successfully established through Q.931 on PRI Serial 5/1:15.

<Sysname> display isdn active-channel interface serial 5/1:15

Serial5/1:15

Channel Info: B2

Call Property: Digital

Call Type: Out

Calling Number: 8306001

Calling Subaddress:

Called Number: 8306002

Called Subaddress:

Start Time: 13-02-14 12:22:26

Time Used: 00:11:20

Table 11 Command output

Field Description

Channel Info B channel used for calls.

Call Property

Call property:

• Digital.

• Analog.

Call Type

Call type:

• In—Incoming calls.

• Out—Outgoing calls.

Start Time Time when the call was set up.

Time Used Duration of the call.

display isdn call-info

Use display isdn call-info to display calling information on an ISDN interface.

Syntax

display isdn call-info [ interface interface-type interface-number ]

Views

Any view

Predefined user roles

network-admin

network-operator

Parameters

interface interface-type interface-number: Specifies an ISDN interface by its type and number, a BRI or

a PRI. If you do not specify an interface, this command displays calling information for all ISDN

interfaces.