HP MSR2000/3000/4000 Router Series Layer 2 - WAN Command Reference

71
Table 13 Command output
Field Descri
p
tion
SPID Type
SPID type:
• NIT—Not initial terminal mode.
• STATIC—Static mode that has only the L3 initialization process.
• AUTO—Dynamic mode that includes both the negotiation and the L3 initialization.
SPID B1 SPID information for the B1 channel on the BRI.
SPID B2 SPID information for the B2 channel on the BRI.
SPID Num
SPID value of the BRI interface. It can be a static configuration or the result of a dynamic
negotiation, both depending on the specified SPID Type.
LDN Local dialing number
Neg State
Negotiation state of the SPID:
• SPID_UNASSIGNED—The SPID is not assigned or the SPID assignment fails.
• ASSIGN_AWAITING_SPID—The device has initiated an auto-SPID request, but the
SPID is not assigned.
• SPID_ASSIGNED—The PBX has finished the SPID assignment, and the device selects
one SPID.
• ASSIGN_AWAITING_CALL_CLEAR—The PBX enters this state after receiving the
auto-SPID request when there is call.
Init State
Initialization state of the SPID:
• INIT_NULL—No Layer 3 initialization occurs.
• INIT_IND—The PBX issues the Layer 3 initialization.
• INIT_PROCEEDING—The Layer 3 initialization is proceeding.
• INIT_END—The Layer 3 initialization ends.
• INIT_AWAITING_CALL_CLEAR—The PBX enters this state after receiving the Layer 3
initialization request when there is call.
SPID timer Timeout value of the timer TSPID.
SPID resend SPID message retransmission times.
isdn bch-local-manage
Use isdn bch-local-manage to enable local ISDN B channel management.
Use undo isdn bch-local-manage to restore the default.
Syntax
isdn bch-local-manage [ exclusive ]
undo isdn bch-local-manage
Default
Local ISDN B channel management is not enabled, and the ISDN B channel is managed by the PBX.
Views
ISDN interface view