HP MSR2000/3000/4000 Router Series Layer 2 - WAN Command Reference

81
# Send setup messages without the sending complete information element on BRI 2/0.
[Sysname-Bri2/0] isdn ignore sending-complete outgoing
Related commands
isdn protocol-type
isdn l3-timer
Use isdn l3-timer to set the timeout value of an ISDN L3 timer.
Use undo isdn l3-timer to restore the default.
Syntax
isdn l3-timer timer-name time-interval
undo isdn l3-timer { timer-name | all }
Default
Table 14 lists the defaults of the DSS1 ISDN L3 timers. For the defaults of the L3 timers in any other ISDN
protocol, perform the display isdn parameters command.
Views
ISDN interface view
Predefined user roles
network-admin
Parameters
timer-name: Specifies an ISDN L3 timer by its name.
time-interval: Specifies the timeout value of an ISDN L3 timer.
all: Restores default timeout values of all the L3 timers.
Table 14 DSS1 ISDN L3 timers
time
r
-nam
e
Timer name Value ran
g
e (in seconds) Default (in seconds)
t301 T301 30 to 1200 240
t302 T302 1 to 60 15
t303 T303 2 to 10 4
t304 T304 10 to 60 30
t305 T305 4 to 30 30
t308 T308 2 to 10 4
t309 T309 1 to 240 90
t310 T310 10 to 240 40
t313 T313 2 to 10 4
t322 T322 2 to 10 4