4000 Router Series Layer 2 - WAN Configuration Guide

ManualsBrandsHP ManualsNetwork HardwareHP MSR3024 TAA-compliant AC Router

121

122

123

124

125

126

127

128

129

130

123

[RouterA-Dialer0] quit

# Assign an IP address to interface Dialer 1, enable B-DDR, and configure the remote

username allowed to call in.

[RouterA] interface dialer 1

[RouterA-Dialer1] ip address 122.1.1.1 255.255.255.0

[RouterA-Dialer1] dialer bundle enable

[RouterA-Dialer1] dialer peer-name userc

# Configure information for PPP authentication and the dial strings on interface Dialer1.

[RouterA-Dialer1] dialer-group 1

[RouterA-Dialer1] ppp authentication-mode pap

[RouterA-Dialer1] ppp pap local-user usera password simple usera

[RouterA-Dialer1] dialer number 8810063

[RouterA-Dialer1] quit

# Configure information for PPP authentication on interface BRI 1/0, and assign the interface

to dialer bundle 0 and dialer bundle 1.

[RouterA] interface bri 1/0

[RouterA-Bri1/0] dialer bundle-member 0

[RouterA-Bri1/0] dialer bundle-member 1

[RouterA-Bri1/0] link-protocol ppp

[RouterA-Bri1/0] ppp authentication-mode pap

[RouterA-Bri1/0] ppp pap local-user usera password simple usera

e. Configure Router B:

# Create dialer access group 2 and configure a dial access rule for it. Create a local user

account usera for Router A, and configure PPP authentication for it.

<RouterB> system-view

[RouterB] dialer-group 2 rule ip permit

[RouterB] local-user usera class network

[RouterB-luser-network-usera] password simple usera

[RouterB-luser-network-usera] service-type ppp

[RouterB-luser-network-usera] quit

# Assign an IP address to interface Dialer 0, enable B-DDR, and configure the remote

username allowed to call in.

[RouterB] interface dialer 0

[RouterB-Dialer0] ip address 100.1.1.2 255.255.255.0

[RouterB-Dialer0] dialer bundle enable

[RouterB-Dialer0] dialer peer-name usera

# Configure information for PPP authentication and the dial string on interface Dialer 0.

[RouterB-Dialer0] dialer-group 2

[RouterB-Dialer0] ppp authentication-mode pap

[RouterB-Dialer0] dialer number 8810048

[RouterB-Dialer0] ppp pap local-user userb password simple userb

[RouterB-Dialer0] quit

# Configure PPP authentication on interface BRI 1/0, and assign it to dialer bundle 0.

[RouterB] interface bri 1/0

[RouterB-Bri1/0] dialer bundle-member 0

[RouterB-Bri1/0] link-protocol ppp

[RouterB-Bri1/0] ppp authentication-mode pap