HP MSR2000/3000/4000 Router Series Layer 2 - WAN Configuration Guide
8
For clients requiring no authentication, you can use either method 1 or method 2, but not both.
For clients requiring authentication, you can use one or more of the three methods, but cannot use
method 1 and method 2 at the same time. When multiple methods are configured, method 3 takes
precedence over method 1 or method 2.
To configure the device as the server (Method 1):
Ste
p
Command
Remarks
1. Enter system view.
system-view N/A
2. Enter interface view.
interface interface-type
interface-number
N/A
3. Configure the interface to assign
an IP address to the peer.
remote address ip-address
By default, an interface does not
assign an IP address to the peer.
4. Configure an IP address for the
interface.
ip address ip-address
By default, no IP address is
configured on an interface.
To configure the device as the server (Method 2):
Ste
p
Command
Remarks
1. Enter system view.
system-view N/A
2. Configure an address pool.
ip pool pool-name start-ip-address
[ end-ip-address ] [ group
group-name ]
By default, no address pool is
configured.
3. Enter interface view.
interface interface-type
interface-number
N/A
4. Configure the interface to assign
an IP address from the
configured address pool to the
peer.
remote address pool pool-name
By default, an interface does not
assign an IP address to the peer.
5. Configure an IP address for the
interface.
ip address ip-address
By default, no IP address is
configured on an interface.
To configure the device as the server (Method 3):
Ste
p
Command
Remarks
1. Enter system view.
system-view N/A
2. Configure an address pool.
ip pool pool-name start-ip-address
[ end-ip-address ] [ group group
name ]
By default, no address pool is
configured.
3. Enter ISP domain view.
domain isp-name N/A
4. Associate the ISP domain with
the configured address pool for
address assignment.
authorization-attribute ip-pool
pool-name
By default, no address pool is
associated.
For more information about this
command, see Security
Command Reference.
5. Return to system view.
quit N/A