HP MSR2000/3000/4000 Router Series Layer 2 - WAN Configuration Guide

84
Ste
p
Command Remarks
3. Enable PIN authentication.
pin verification enable [ pin ]
The default setting depends on the
modem model.
Requirement for the current PIN
varies by device model.
4. Configure the PIN for
authentication.
pin verify { simple pin | cipher
ciphered-pin }
By default, no PIN is configured for
a 3G modem.
This command saves the PIN on the
device, which enables automatic
PIN authentication when required.
Therefore, you can execute this
command before or after enabling
PIN authentication.
5. (Optional.) Specify a PUK to
unlock the PIN.
pin unlock puk new-pin N/A
6. (Optional.) Modify the PIN of
the SIM/UIM card.
pin modify current-pin new-pin
The modified PIN is saved in the
SIM/UIM card.
Configure the modified PIN by
using the pin verify command on
the device. Otherwise, PIN
authentication fails.
Configuring DM
NOTE:
Support for DM depends on the modem model.
Enabling diagnostic and monitoring (DM) on a 3G modem allows third-party debugging tools to
diagnose and monitor the 3G modem through cellular interface debugging output. For more information
about DM, see related 3G modem user manuals.
To enable DM:
Ste
p
Command Remarks
1. Enter system view.
system-view N/A
2. Enter cellular interface view.
controller cellular interface-number N/A
3. Enable DM.
dm-port open
The default setting depends on the
modem model.
Issuing a configuration directive to a 3G modem
CAUTION:
Confi
g
uration directives mi
g
ht chan
g
e the operatin
g
state of a 3G modem and affect the basic functions
of the modem (such as dialup). Therefore, use configuration directives with caution.