HP MSR2000/3000/4000 Router Series Layer 3 - IP Routing Command Reference

99
Field Descri
p
tion
Reset phase of module
Reset phase of each module:
• Main control module:
{ N/A—Not reset.
{ Delete area.
{ Delete process.
• Neighbor maintenance (P) module:
{ N/A—Not reset.
{ Delete neighbor.
{ Delete interface.
{ Delete vlink—Delete virtual link.
{ Delete shamlink—Delete sham link.
• LSDB synchronization (L) module:
{ N/A—Not reset.
{ Stop timer.
{ Delete ASE—Delete all ASE LSAs.
{ Delete ASE maps—Delete ASE LSA maps.
{ Clear process data.
{ Delete area LSA—Delete LSAs and maps from an area.
{ Delete area interface—Delete interfaces from an area.
{ Delete process—Delete process-related resources.
{ Restart—Restart process-related resources.
• Route calculation (C) module:
{ N/A—Not reset.
{ Delete topology—Delete area topology.
{ Delete router—Delete routes of routers.
{ Delete intra AS—Delete intra-AS routes
{ Delete inter AS—Delete AS-external routes.
{ Delete forward address—Delete forwarding address list.
{ Delete advertise—Delete advertising router list.
• Route redistribution (R) module:
{ N/A—Not reset.
{ Delete ABR summary—Delete summary routes of the
ABR.
{ Delete ASBR summary—Delete summary routes of the
ASBR.
{ Delete import—Delete redistributed routes.
7/5 translator state
State of the translator that translates Type-7 LSAs to Type-5
LSAs. The value can be one of the following:
• Enabled—The translator is specified through commands.
• Elected—The translator is designated through election.
• Disabled—The device is not a translator.
7/5 translate stability timer interval Stability interval for Type-7 LSA-to-Type-5 LSA translation.
ExChange/Loading Neighbors Neighbors in ExChange/Loading state.
Area Area ID in the IP address format.