4000 Router Series Layer 3 - IP Routing Command Reference

107

network-operator

Parameters

process-id: Specifies an OSPF process by its ID in the range of 1 to 65535. Without this argument, the

command displays OSPF route calculation log information for all processes.

Usage guidelines

The route statistics are the number of routes newly installed to the IP routing table.

Examples

# Display OSPF route calculation log information for all processes.

<Sysname> display ospf event-log spf

OSPF Process 1 with Router ID 1.1.1.2

SPF log

Date Time Duration Intra Inter External Reason

2012-06-27 15:28:26 0.95 1 1 10000 Intra-area LSA

2012-06-27 15:28:23 0.2 0 0 0 Area 0 full neighbor number

2012-06-27 15:28:19 0 0 0 0 Intra-area LSA

2012-06-27 15:28:19 0 0 0 0 external LSA

2012-06-27 15:28:19 0.3 0 0 0 Intra-area LSA

2012-06-27 15:28:12 0 1 0 0 Intra-area LSA

2012-06-27 15:28:11 0 0 0 0 Routing policy

2012-06-27 15:28:11 0 0 0 0 Intra-area LSA

Table 29 Command output

Field Descri

tion

Date/Time Time when the route calculation starts.

Duration Duration of the route calculation, in seconds.

Intra Number of intra-area routes newly installed to the IP routing table.

Inter Number of inter-area routes newly installed to the IP routing table.

External Number of external routes newly installed to the IP routing table.