HP MSR2000/3000/4000 Router Series Layer 3 - IP Routing Command Reference

122
Parameters
process-id: Specifies an OSPF process by its ID in the range of 1 to 65535. Without this argument, the
command displays OSPF neighbor statistics for all OSPF processes.
standby slot slot-number: Displays backup OSPF neighbor statistics of a card. Without this option, the
command displays OSPF neighbor statistics.
Examples
# Display OSPF neighbor statistics.
<Sysname> display ospf peer statistics
OSPF Process 1 with Router ID 10.3.1.1
Neighbor Statistics
Area ID Down Attempt Init 2-Way ExStart Exchange Loading Full Total
0.0.0.0 0 0 0 0 0 0 0 1 1
0.0.0.2 0 0 0 0 0 0 0 1 1
Total 0 0 0 0 0 0 0 2 2
Sham links' neighbors (Total: 1):
Down: 0, Init: 0, 2-Way: 0, ExStart: 0, Exchange: 0, Loading: 0, Full: 1
Table 39 Command output
Field Description
Area ID
The state statistics information of all the routers in the area to which the router belongs
is displayed.
Down Number of neighboring routers in Down state in the same area.
Attempt Number of neighboring routers in Attempt state in the same area.
Init Number of neighboring routers in Init state in the same area.
2-Way Number of neighboring routers in 2-Way state in the same area.
ExStart Number of neighboring routers in ExStart state in the same area.
Exchange Number of neighboring routers in Exchange state in the same area.
Loading Number of neighboring routers in Loading state in the same area.
Full Number of neighboring routers in Full state in the same area.
Total
Total number of neighbors under the same state: Down, Attempt, Init, 2-Way, ExStart,
Exchange, Loading, or Full.
Sham links' neighbors Statistics of sham links' neighbors.
display ospf request-queue
Use display ospf request-queue to display OSPF request queue information.
Syntax
display ospf [ process-id ] request-queue [ interface-type interface-number ] [ neighbor-id ]
Views
Any view