HP MSR2000/3000/4000 Router Series Layer 3 - IP Routing Command Reference

127
Table 43 Command output
Field Descri
p
tion
Priority Prefix priority: critical, high, medium, and low.
SubProtoID Sub protocol ID.
Preference OSPF route preference.
NbrId Neighbor router ID.
NextHop Primary next hop IP address.
BkNextHop Backup next hop IP address.
IfType Type of the network to which the primary next hop belongs.
BkIfType Type of the network to which the backup next hop belongs.
Interface Output interface.
BkInterface Backup output interface.
NibID Next hop ID.
Status
Route status:
• Local—The route is on the local end and is not sent to the route management
module.
• Invalid—The next hop is invalid.
• Stale—The next hop is stale.
• Normal—The route is available.
• Delete—The route is deleted.
• Host-Adv—The route is a host route.
• Rely—The route is a recursive route.
display ospf spf-tree
Use display ospf spf-tree to display OSPF topology information.
Syntax
display ospf [ process-id ] [ area area-id ] spf-tree [ verbose ]
Views
Any view
Predefined user roles
network-admin
network-operator
Parameters
process-id: Specifies an OSPF process by its ID in the range of 1 to 65535. Without this argument, the
command displays topology information for all OSPF processes.
area area-id: Specifies an OSPF area by its ID, which is an IP address or a decimal integer in the range
of 0 to 4294967295 that is translated into the IP address format. Without this option, the command
displays topology information for all OSPF areas.