4000 Router Series Layer 3 - IP Routing Command Reference

Examples

# Create a RIB IPv6 address family and enter RIB IPv6 address family view.

<Sysname> system-view

[Sysname] rib

[Sysname-rib] address-family ipv6

[Sysname-rib-ipv6]

display ip routing-table

Use display ip routing-table to display routing table information.

Syntax

display ip routing-table [ vpn-instance vpn-instance-name ] [ verbose ]

Views

Any view

Predefined user roles

network-admin

network-operator

Parameters

vpn-instance vpn-instance-name: Specifies an MPLS L3VPN instance by its name, a case-sensitive string

of 1 to 31 characters. Without this option, the command displays the routing table information for the

public network.

verbose: Displays detailed routing table information, including information about both active and

inactive routes. Without this keyword, the command displays only brief information about active routes.

Examples

# Display brief information about active routes in the routing table.

<Sysname> display ip routing-table

Destinations : 13 Routes : 13

Destination/Mask Proto Pre Cost NextHop Interface

0.0.0.0/32 Direct 0 0 127.0.0.1 InLoop0

1.1.1.0/24 Static 60 0 192.168.47.4 Eth1/1

127.0.0.0/8 Direct 0 0 127.0.0.1 InLoop0

127.0.0.0/32 Direct 0 0 127.0.0.1 InLoop0

127.0.0.1/32 Direct 0 0 127.0.0.1 InLoop0

127.255.255.255/32 Direct 0 0 127.0.0.1 InLoop0

192.168.1.0/24 Direct 0 0 192.168.1.40 Vlan11

192.168.1.0/32 Direct 0 0 192.168.1.40 Vlan11

192.168.1.40/32 Direct 0 0 127.0.0.1 InLoop0

192.168.1.255/32 Direct 0 0 192.168.1.40 Vlan11

224.0.0.0/4 Direct 0 0 0.0.0.0 NULL0

224.0.0.0/24 Direct 0 0 0.0.0.0 NULL0

255.255.255.255/32 Direct 0 0 127.0.0.1 InLoop0