HP MSR2000/3000/4000 Router Series Layer 3 - IP Routing Command Reference

154
undo opaque-capability
Default
The feature is enabled.
Views
OSPF view
Predefined user roles
network-admin
Usage guidelines
After the opaque LSA advertisement and reception is enabled, OSPF can receive and advertise Type-9,
Type-10, and Type-11 opaque LSAs.
Examples
# Disable opaque LSA advertisement and reception.
<Sysname> system-view
[Sysname] ospf 100
[Sysname-ospf-100] undo opaque-capability
ospf
Use ospf to enable OSPF and enter OSPF view.
Use undo ospf to disable OSPF.
Syntax
ospf [ process-id | router-id router-id | vpn-instance vpn-instance-name ] *
undo ospf [ process-id ]
Default
OSPF is disabled.
Views
System view
Predefined user roles
network-admin
Parameters
process-id: Specifies an OSPF process by its ID in the range of 1 to 65535.
router-id router-id: Specifies an OSPF router ID in dotted decimal notation.
vpn-instance vpn-instance-name: Specifies an MPLS L3VPN instance by its name, a case-sensitive string
of 1 to 31 characters. If no VPN is specified, the OSPF process runs on the public network.
Usage guidelines
You can enable multiple OSPF processes on a router and specify different router IDs for them.
Enable an OSPF process before performing other tasks.