HP MSR2000/3000/4000 Router Series Layer 3 - IP Routing Command Reference

4
BkTunnel ID: Invalid BkInterface: N/A
...
Table 2 Command output
Field Descri
p
tion
Destinations Number of destination addresses.
Routes Number of routes.
Destination Destination address/mask length.
Protocol Protocol that installed the route.
SubProtID ID of the subprotocol for routing.
Age Time for which the route has been in the routing table.
Cost Cost of the route.
Preference Preference of the route.
Tag Route tag.
State
Route status:
• Active—Active unicast route.
• Adv—Route that can be advertised.
• Inactive—Inactive route.
• NoAdv—Route that the router must not advertise.
• Vrrp—Routes generated by VRRP.
• Nat—Routes generated by NAT.
• TunE—Tunnel.
OrigTblID Original routing table ID.
OrigVrf Original VPN that the route belongs to.
TableID ID of the routing table.
OrigAs Original AS number.
NBRID Neighbor ID of the route.
LastAs Last AS number.
AttrID Attribute ID.
Neighbor Address of the neighbor determined by the routing protocol.
Flags Flags of the route.
OrigNextHop Next hop address of the route.
RealNextHop Real next hop of the route.
BkLabel Backup label.
BkNexthop Backup next hop.
Interface Output interface for packets to be forwarded along the route.
BkTunnel ID Backup tunnel ID.
BkInterface Backup output interface.