HP MSR2000/3000/4000 Router Series Layer 3 - IP Routing Command Reference

160
Examples
# Disable Ethernet 1/1 from calculating a backup next hop by using the LFA algorithm.
<Sysname> system-view
[Sysname] interface ethernet 1/1
[Sysname-Ethernet1/1] undo ospf fast-reroute lfa-backup
ospf mib-binding
Use ospf mib-binding to bind an OSPF process to MIB.
Use undo ospf mib-binding to restore the default.
Syntax
ospf mib-binding process-id
undo ospf mib-binding
Default
MIB is bound to the OSPF process with the smallest process ID.
Views
System view
Predefined user roles
network-admin
Parameters
process-id: Specifies an OSPF process by its ID in the range of 1 to 65535.
Usage guidelines
If the specified process ID does not exist, a notification reports that the MIB binding configuration has
failed.
Deleting an OSPF process that has been bound to MIB also unbinds the OSPF process from MIB, and
re-binds MIB to the OSPF process with the smallest process ID.
Examples
# Bind MIB operation to OSPF process 100.
<Sysname> system-view
[Sysname] ospf mib-binding 100
ospf mtu-enable
Use ospf mtu-enable to enable an interface to add the interface MTU into DD packets.
Use undo ospf mtu-enable to restore the default.
Syntax
ospf mtu-enable
undo ospf mtu-enable
Default
The MTU in DD packets is 0.