HP MSR2000/3000/4000 Router Series Layer 3 - IP Routing Command Reference

186
narrow-compatible: Receives both narrow and wide cost style packets, but sends only narrow cost style
packets.
wide-compatible: Receives both narrow and wide cost style packets, but sends only wide cost style
packets.
relax-spf-limit: Allows receiving routes with a cost greater than 1023. If this keyword is not specified, any
route with a cost bigger than 1023 will be discarded. This keyword is only available when compatible or
narrow-compatible is included.
Examples
# Configure the router to send only narrow cost style packets, but receive both narrow and wide cost style
packets.
<Sysname> system-view
[Sysname] isis 1
[Sysname-isis-1] cost-style narrow-compatible
Related commands
• circuit-cost
• isis cost
default-route-advertise (IS-IS view)
Use default-route-advertise to advertise a default route of 0.0.0.0/0.
Use undo default-route-advertise to restore the default.
Syntax
default-route-advertise [ [ level-1 | level-1-2 | level-2 ] | route-policy route-policy-name ] *
undo default-route-advertise
Default
Default route advertisement is disabled.
Views
IS-IS view
Predefined user roles
network-admin
Parameters
level-1: Advertises a Level-1 default route.
level-1-2: Advertises both Level-1 and Level-2 default routes.
level-2: Advertises a Level-2 default route.
route-policy route-policy-name: Specifies a routing policy by its name, a case-sensitive string of 1 to 63
characters.
Usage guidelines
If no level is specified, a Level-2 default route is advertised.
The Level-1 default route is advertised to other routers in the same area, and the Level-2 default route is
advertised to all the Level-2 and Level-1-2 routers.