HP MSR2000/3000/4000 Router Series Layer 3 - IP Routing Command Reference

196
Field Descri
p
tion
Seq Num LSP sequence number.
Checksum LSP checksum.
Holdtime LSP lifetime, which decreases as time elapses.
Length LSP length.
ATT/P/OL
• ATT—Attach bit.
• P—Partition bit.
• OL—Overload bit.
1 means the LSP bit is set and 0 means the LSP bit is not set.
Source System ID of the originating router.
NLPID Network layer protocol the originating router runs.
Area address Area address of the originating router.
IPv4 address IP address of the originating router's IS-IS interface.
IPv6 address IPv6 address of the originating router's IS-ISv6 interface.
NBR ID Neighbor ID of the originating router.
IP-Internal Internal IP address and mask of the originating router.
IP-External External IP address and mask of the originating router.
IP-Extended Extended IP address and mask of the originating router.
COST Cost.
Auth Authentication information of the originating router.
IPV6 Internal IPv6 address and prefix of the originating router.
IPV6-Ext External IPv6 address and prefix of the originating router.
display isis mesh-group
Use display isis mesh-group to display IS-IS mesh group configuration information.
Syntax
display isis mesh-group [ process-id ]
Views
Any view
Predefined user roles
network-admin
network-operator
Parameters
process-id: Displays IS-IS mesh-group configuration for an IS-IS process specified by its ID in the range of
1 to 65535. Without this argument, the command displays IS-IS mesh group configuration information
for all IS-IS processes.