HP MSR2000/3000/4000 Router Series Layer 3 - IP Routing Command Reference

197
Examples
# Add Serial 2/0 and Serial 2/1 to mesh group 100.
<Sysname> system-view
[Sysname] interface serial 2/0
[Sysname-Serial2/0] isis mesh-group 100
[Sysname-Serial2/0] quit
[Sysname] interface serial 2/1
[Sysname-Serial2/1] isis mesh-group 100
# Display IS-IS mesh-group configuration information.
[Sysname-Serial2/1] display isis mesh-group
Mesh Group information for ISIS(1)
----------------------------------------------------------------------
Interface Status
Serial2/0 100
Serial2/1 100
Table 56 Command output
Field Descri
p
tion
Interface Interface name.
Status
Mesh group the interface belongs to/whether a blocked
interface is configured.
display isis name-table
Use display isis name-table to display the host name to system ID mapping table.
Syntax
display isis name-table [ process-id ]
Views
Any view
Predefined user roles
network-admin
network-operator
Parameters
process-id: Displays the host name to system ID mapping table for an IS-IS process specified by its ID in
the range of 1 to 65535. Without this argument, the command displays the host name to system ID
mapping table for all IS-IS processes.
Examples
# Configure a name RUTA for the local IS system.
<Sysname> system-view
[Sysname] isis 1
[Sysname-isis-1] is-name RUTA
# Map the host name RUTB to the system ID 0000.0000.0041 of a remote IS.