4000 Router Series Layer 3 - IP Routing Command Reference

display ip routing-table protocol

Use display ip routing-table protocol to display information about routes installed by a protocol.

Syntax

display ip routing-table [ vpn-instance vpn-instance-name ] protocol protocol [ inactive | verbose ]

Views

Any view

Predefined user roles

network-admin

network-operator

Parameters

vpn-instance vpn-instance-name: Specifies MPLS L3VPN instance by its name, a case-sensitive string of

1 to 31 characters. Without this option, the command displays routing information for the public network.

protocol: Specifies a routing protocol. It can be bgp, direct, isis, ospf, rip, or static.

inactive: Displays information about inactive routes. Without this keyword, the command displays

information about both active and inactive routes.

verbose: Displays detailed routing table information. Without this keyword, the command displays brief

routing information.

Examples

# Display brief information about direct routes.

<Sysname> display ip routing-table protocol direct

Summary Count : 13

Direct Routing Table Status : <Active>

Summary Count : 13

Destination/Mask Proto Pre Cost NextHop Interface

0.0.0.0/32 Direct 0 0 127.0.0.1 InLoop0

2.2.2.0/24 Direct 0 0 2.2.2.1 Vlan2

2.2.2.0/32 Direct 0 0 2.2.2.1 Vlan2

2.2.2.2/32 Direct 0 0 127.0.0.1 InLoop0

2.2.2.255/32 Direct 0 0 2.2.2.1 Vlan2

127.0.0.0/8 Direct 0 0 127.0.0.1 InLoop0

127.0.0.0/32 Direct 0 0 127.0.0.1 InLoop0

127.0.0.1/32 Direct 0 0 127.0.0.1 InLoop0

127.255.255.255/32 Direct 0 0 127.0.0.1 InLoop0

192.168.80.0/24 Direct 0 0 192.168.80.10 Eth1/1

192.168.80.0/32 Direct 0 0 192.168.80.10 Eth1/1

192.168.80.10/32 Direct 0 0 127.0.0.1 InLoop0

192.168.80.255/32 Direct 0 0 192.168.80.10 Eth1/1

Direct Routing Table Status : <Inactive>