HP MSR2000/3000/4000 Router Series Layer 3 - IP Routing Command Reference

230
Predefined user roles
network-admin
Parameters
number: Specifies the maximum number of redistributed Level 1/Level 2 IPv4 routes.
The following matrix shows the value ranges for the number argument on different MSR routers:
Argument MSR2000 MSR3000 MSR4000
number 1 to 200000 1 to 500000 1 to 1000000
Examples
# Configure IS-IS process 1 to redistribute up to 1000 Level 1/Level 2 IPv4 routes.
<Sysname> system-view
[Sysname] isis 1
[Sysname-isis-1] import-route limit 1000
Related commands
import-route limit
isis
Use isis to enable an IS-IS process and enter IS-IS view.
Use undo isis to disable an IS-IS process.
Syntax
isis [ process-id ] [ vpn-instance vpn-instance-name ]
undo isis [ process-id ]
Default
The system does not run any IS-IS process.
Views
System view
Predefined user roles
network-admin
Parameters
process-id: Specifies an IS-IS process by its ID in the range of 1 to 65535. The default is 1.
vpn-instance vpn-instance-name: Specifies an MPLS L3VPN instance by its name, a case-sensitive string
of 1 to 31 characters. If no VPN is specified, the IS-IS process runs on the public network.
Examples
# Enable IS-IS process 1 and specify the system ID as 0000.0000.0002 and area ID as 01.0001.
<Sysname> system-view
[Sysname] isis 1
[Sysname-isis-1] network-entity 01.0001.0000.0000.0002.00