HP MSR2000/3000/4000 Router Series Layer 3 - IP Routing Command Reference

238
[Sysname-Serial2/1.1] isis mesh-group 3
isis mib-binding
Use isis mib-binding to bind an IS-IS process to MIB operation.
Use undo isis mib-binding to restore the default.
Syntax
isis mib-binding process-id
undo isis mib-binding
Default
MIB operation is bound to the IS-IS process with the smallest process ID.
Views
System view
Predefined user roles
network-admin
Parameters
process-id: Specifies an IS-IS process by its ID in the range of 1 to 65535.
Usage guidelines
If the specified the process ID does not exist, the MIB binding configuration fails.
Deleting an IS-IS process bound to MIB operation deletes the MIB binding configuration. MIB operation
is bound to the IS-IS process with the smallest process ID.
Examples
# Bind MIB operation to IS-IS process 100.
<Sysname> system-view
[Sysname] isis mib-binding 100
isis peer-ip-ignore
Use isis peer-ip-ignore to configure a PPP interface to not check the peer's IP address in received hello
packets.
Use undo isis peer-ip-ignore to restore the default.
Syntax
isis peer-ip-ignore
undo isis peer-ip-ignore
Default
The PPP interface checks the peer's IP address upon receiving a hello packet.
Views
Interface view