4000 Router Series Layer 3 - IP Routing Command Reference

Table 3 Command output

Field Descri

tion

Proto Protocol that installed the route.

route Number of routes installed by the protocol.

active Number of active routes.

added

Number of routes added to the routing table after the router started up or the routing table was

last cleared.

deleted Number of routes marked as deleted, which will be cleared after a period.

Total Total number of routes.

display ipv6 rib attribute

Use display ipv6 rib attribute to display route attribute information in the IPv6 RIB.

Syntax

display ipv6 rib attribute [ attribute-id ]

Views

Any view

Predefined user roles

network-admin

network-operator

Parameters

attribute-id: Specifies a route attribute by its ID in the range of 0 to FFFFFFFF.

Examples

# Display route attribute information in the IPv6 RIB.

<Sysname> display ipv6 rib attribute

Total number of attribute(s): 1

Detailed information of attribute 0x9:

Flag: 0x0

Protocol: BGP4+

Address family: IPv6

Reference count: 0

Local prefrence: 0

Ext-communities number: 0

Ext-communities value: N/A

Communities number: 0

Communities value: N/A

AS-path number: 0

AS-path value: N/A

For command output, see Table 9.