HP MSR2000/3000/4000 Router Series Layer 3 - IP Routing Command Reference

248
undo lsp-fragments-extend
Default
LSP fragment extension is disabled.
Views
IS-IS view
Predefined user roles
network-admin
Parameters
level-1: Applies the fragment extension to Level-1 LSPs.
level-1-2: Applies the fragment extension to both Level-1 and Level-2 LSPs.
level-2: Applies the fragment extension to Level-2 LSPs.
Usage guidelines
If no level is specified, the command enables LSP fragment extension for both Level-1 and Level-2.
Examples
# Enable LSP fragment extension for Level-2.
<Sysname> system-view
[Sysname] isis 1
[Sysname-isis-1] lsp-fragments-extend level-2
lsp-length originate
Use lsp-length originate to configure the maximum size of generated Level-1 or Level-2 LSPs.
Use undo lsp-length originate to remove the configuration.
Syntax
lsp-length originate size [ level-1 | level-2 ]
undo lsp-length originate [ level-1 | level-2 ]
Default
The maximum size of generated Level-1 and Level-2 LSPs is 1497 bytes.
Views
IS-IS view
Predefined user roles
network-admin
Parameters
size: Specifies the maximum size of LSP packets, in the range of 512 to 16384 bytes.
level-1: Applies the size to Level-1 LSP packets.
level-2: Applies the size to Level-2 LSP packets.