HP MSR2000/3000/4000 Router Series Layer 3 - IP Routing Command Reference

256
Usage guidelines
If the on-startup keyword is not specified, the command sets the overload bit immediately until the undo
set-overload command is executed.
If the on-startup keyword is specified, IS-IS sets the overload bit upon system startup and keeps it set
within the timeout2 interval.
Examples
# Set overload flag on the current router.
<Sysname> system-view
[Sysname] isis 1
[Sysname-isis-1] set-overload
snmp-agent trap enable isis
Use snmp-agent trap enable isis to enable the sending of SNMP notifications.
Use undo snmp-agent trap enable isis to disable the feature.
Syntax
snmp-agent trap enable isis [ adjacency-state-change | area-mismatch | authentication |
authentication-type | buffsize-mismatch | id-length-mismatch | lsdboverload-state-change |
lsp-corrupt | lsp-parse-error | lsp-size-exceeded | manual-address-drop | max-seq-exceeded |
maxarea-mismatch | own-lsp-purge | protocol-support | rejected-adjacency | skip-sequence-number
| version-skew ] *
undo snmp-agent trap enable isis [ adjacency-state-change | area-mismatch | authentication |
authentication-type | buffsize-mismatch | id-length-mismatch | lsdboverload-state-change |
lsp-corrupt | lsp-parse-error | lsp-size-exceeded | manual-address-drop | max-seq-exceeded |
maxarea-mismatch | own-lsp-purge | protocol-support | rejected-adjacency | skip-sequence-number
| version-skew ] *
Default
IS-IS notification sending is enabled.
Views
System view
Predefined user roles
network-admin
Parameters
adjacency-state-change: Specifies notifications about adjacency state changes.
area-mismatch: Specifies notifications about mismatches in area addresses between Hello packets.
authentication: Specifies notifications about authentication failures of IS-IS packets.
authentication-type: Specifies notifications about authentication type errors of IS-IS packets.
buffsize-mismatch: Specifies notifications about buffer size mismatches for LSPs.
id-length-mismatch: Specifies notifications about mismatches in system ID lengths of IS-IS packets.
lsdboverload-state-change: Specifies notifications about LSDB overload state changes.
lsp-corrupt: Specifies notifications about LSP checksum errors in the LSDB.