HP MSR2000/3000/4000 Router Series Layer 3 - IP Routing Command Reference

257
lsp-parse-error: Specifies notifications about LSP packet parse errors.
lsp-size-exceeded: Specifies notifications about oversized LSPs that result in flooding failures.
manual-address-drop: Specifies notifications about manually configured area addresses that have been
dropped.
max-seq-exceeded: Specifies notifications about LSPs with exceeded serial numbers.
maxarea-mismatch: Specifies notifications about mismatches in maximum area address values.
own-lsp-purge: Specifies notifications about attempts to purge local LSPs.
protocol-support: Specifies notifications about supported protocol mismatches.
rejected-adjacency: Specifies notifications about mismatched Hello adjacencies that have been rejected.
skip-sequence-number: Specifies notifications about system ID duplications.
version-skew: Specifies notifications about mismatches in Hello packet protocol versions.
Usage guidelines
If no parameters are specified, the command enables sending of all SNMP notifications.
If no IS-IS process exists, the configuration is not allowed.
This function does not take effect if all configured IS-IS processes are deleted.
Examples
# Disable IS-IS notification sending.
<Sysname> system-view
[Sysname] undo snmp-agent trap enable isis
summary (IS-IS view)
Use summary to configure a summary route.
Use undo summary to remove a summary route.
Syntax
summary ip-address { mask | mask-length } [ avoid-feedback | generate_null0_route | [ level-1 |
level-1-2 | level-2 ] | tag tag ] *
undo summary ip-address { mask | mask-length } [ level-1 | level-1-2 | level-2 ]
Default
No summarization is configured.
Views
IS-IS view
Predefined user roles
network-admin
Parameters
ip-address: Specifies the destination IP address of the summary route.
mask: Specifies the mask of the destination IP address, in dotted decimal format.
mask-length: Specifies the mask length of the summary route, in the range of 0 to 32.