HP MSR2000/3000/4000 Router Series Layer 3 - IP Routing Command Reference

283
display bgp group ipv4 unicast
Use display bgp group ipv4 unicast to display BGP IPv4 unicast peer group information.
Syntax
display bgp group ipv4 [ unicast ] [ vpn-instance vpn-instance-name ] [ group-name ]
Views
Any view
Predefined user roles
network-admin
network-operator
Parameters
vpn-instance vpn-instance-name: Specifies an MPLS L3VPN instance by its name, a case-sensitive string
of 1 to 31 characters. If no VPN instance is specified, the command displays BGP IPv4 unicast peer
group information for the public network.
group-name: Specifies a BGP IPv4 unicast peer group by its name, a case-sensitive string of 1 to 47
characters. If no group is specified, this command displays brief information about all BGP IPv4 unicast
peer groups.
Usage guidelines
The command with the unicast keyword has the same effect as that without the unicast keyword.
Examples
# Display brief information about all BGP IPv4 unicast peer groups for the public network.
BGP peer group: group1
Remote AS: 600
Type: external
Members:
1.1.1.10
BGP peer group: group2
Remote AS number: not specified
Type: external
Members:
2.2.2.2
# Display detailed information about BGP IPv4 unicast peer group group1 for the public network.
<Sysname> display bgp group ipv4 group1
BGP peer group: group1
Remote AS: 600
Type: external
Maximum number of prefixes allowed: 4294967295
Threshold: 75%
Configured hold time: 180 seconds
Keepalive time: 60 seconds
Minimum time between advertisements: 30 seconds
Peer preferred value: 0