HP MSR2000/3000/4000 Router Series Layer 3 - IP Routing Command Reference

291
Maximum allowed prefix number: 4294967295
Threshold: 75%
Minimum time between advertisements is 30 seconds
Optional capabilities:
Multi-protocol extended capability has been enabled
Route refresh capability has been enabled
Peer Preferred Value: 0
BFD: Enabled
Routing policy configured:
No routing policy is configured
Table 77 Command output
Field Description
Peer IP address of the peer.
Local Local router ID.
Type
BGP connection type between the local router and the peer:
• IBGP link—IBGP connection.
• EBGP link—EBGP connection.
remote router ID Router ID of the peer.
BGP current state Current state of the BGP session between the local router and the peer.
Up for Lasting time of the BGP session.
BGP current event Current event of the BGP session between the local router and the peer.
BGP last state Previous state of the BGP session.
Port TCP port numbers of the local router and its peer.
Configured
Timers configured on the local router in seconds, including the holdtime
(Active Hold Time) and keepalive interval (Keepalive Time).
Received
Received timer (configured on the peer) in seconds, including the
holdtime (Active Hold Time).
Negotiated
Negotiated timers in seconds, including the holdtime (Active Hold Time)
and keepalive interval (Keepalive Time).
Peer optional capabilities Optional capabilities supported by the peer.
Peer support BGP route AS4
capability
The peer supports 4-byte AS number.
Address family IPv4 Unicast
IPv4 unicast address family capability: Routes of the address family can
be advertised and received.
Received Total numbers of received messages and updates.
Sent Total numbers of sent messages and updates.
Maximum allowed prefix number Maximum number of routes allowed to learn from the peer.
Threshold
Percentage of received routes from the peer to maximum routes allowed
to learn from the peer. If the percentage is reached, the system
generates alarm messages.