HP MSR2000/3000/4000 Router Series Layer 3 - IP Routing Command Reference

292
Field Description
Minimum time between
advertisements
Minimum route advertisement interval in seconds.
Optional capabilities Optional capabilities supported by the local end.
Peer Preferred Value Preferred value specified for the routes from the peer.
BFD Whether BFD is enabled to detect the link to the BGP peer.
Routing policy configured
Routing policy configured for the peer.
If no routing policy is specified, this field displays No routing policy is
configured.
# Display log information about BGP IPv4 unicast peer 1.1.1.1 for the public network.
<Sysname> display bgp peer ipv4 1.1.1.1 log-info
Peer : 1.1.1.1
Date Time State Notification
Error/SubError
10-Jul-2008 15:46:17 Down Send Notification with Error 1/1
Message Header Error/Connection Not Synchronized
10-Jul-2008 09:23:00 Up
10-Jul-2008 07:46:17 Down Receive Notification with Error 3/2
UPDATE Message Error/Unsupported optional Parameter
10-Jul-2008 06:23:00 Up
10-Jul-2008 05:46:17 Down Send Notification with Error 6/4
Cease/Administrative Reset
Table 78 Command output
Field Description
Peer IP address of the peer.
Date Date on which the Notification was sent or received.
Time Time at which the Notification was sent or received.
State
BGP session state:
• Up—The BGP session is in Established state.
• Down—The BGP session is down.
Notification
Error/SubError
Error code of the Notification, indicating the cause of why the BGP session is down.
• Error—Refers to the error code, which identifies the type of the Notification.
• SubError—Refers to the error subcode of the Notification, which identifies the
specified information about the reported error.
display bgp peer ipv6 unicast
Use display bgp peer ipv6 unicast to display BGP IPv6 unicast peer or peer group information.