HP MSR2000/3000/4000 Router Series Layer 3 - IP Routing Command Reference

294
Field Description
MsgRcvd Number of messages received.
MsgSent Number of messages sent.
OutQ Number of messages to be sent.
PrefRcv Number of prefixes received.
Up/Down Lasting time of the current BGP session state.
State Current state of the BGP session between the local router and the peer.
# Display detailed information about BGP IPv6 unicast peer 1::2 for the public network.
<Sysname> display bgp peer ipv6 1::2 verbose
Peer: 1::2 Local: 192.168.1.136
Type: EBGP link
BGP version 4, remote router ID 192.168.1.135
BGP current state: Established, Up for 00h05m48s
BGP current event: RecvKeepalive
BGP last state: OpenConfirm
Port: Local - 13184 Remote - 179
Configured: Active Hold Time: 180 sec Keepalive Time: 60 sec
Received : Active Hold Time: 180 sec
Negotiated: Active Hold Time: 180 sec Keepalive Time: 60 sec
Peer optional capabilities:
Peer support BGP multi-protocol extended
Peer support BGP route refresh capability
Peer support BGP route AS4 capability
Address family IPv6 Unicast: advertised and received
Received: Total 9 messages, Update messages 1
Sent: Total 10 messages, Update messages 1
Maximum allowed prefix number: 4294967295
Threshold: 75%
Minimum time between advertisements is 30 seconds
Optional capabilities:
Multi-protocol extended capability has been enabled
Route refresh capability has been enabled
Peer preferred value: 0
BFD: Enabled
IPsec profile name: profile001
Routing policy configured:
No routing policy is configured
Table 80 Command output
Field Description
Peer IP address of the peer.